中  文    |    English
Product Sort
Contact Us

Jiangsu Kui Ze Machinery Industry Co., Ltd.
Contact:  Jundao Chen
Mobile phone: 15051221003
Tel: 0513-88621888
Fax: 0513-88621999
Address: Jiangsu Hai'an High-tech Zone
E-mail:chenjundao88@126.com

Concentric different diameter

KYT type concentric reducer rubber shockproof connector

Product use range:

Because rubber joints have a good overall performance, it is widely used in chemical engineering, construction, water supply, drainage, petroleum, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, electricity and other basic projects. The vibration of the pipeline, frequent changes in hot and cold The pipeline.



主要零部件材料 Material of each parts


序号 No.部位 Part材料 Material
1主体 Body天然橡胶(NR)、氯丁橡胶(CR)、丁基橡胶(IIR)、丁晴橡胶(NBR)、氟橡胶(FKM)、三元乙丙橡胶(EPDM)
2内、外衬 Inner & Outer Rubber天然橡胶(NR) 氯丁橡胶(CR)丁基橡胶(IIR) 丁腈橡胶(NBR)氟橡胶(FKM)三元乙丙橡胶(EPDM)聚四氟乙烯(PTFE)
3主体骨架 Body Carcass尼龙帘布 Nylon cord fabric
4增压环 Reinforcing Ring多股镀铜钢丝 Multi-strand coppering steel wire
5法兰 Flange铸造、锻造碳钢 Cast and forged carbon steel(Q235)、不锈钢 Stainless steel(201、304、316、321)、塑料 Plastic(CPVC、PVDF、PPH、UPVC、RPP)


技术条件Technical parameters


项目Item |型号MedolKYT(DN50~300)KYT(DN350~600)A、如介质油,酸碱物质
B、工作温度有特殊要求
C、也可来函来图定制
D、订货时需说明
A. If media is oil, acid or alkali.
B. If special requirements for working temperature
C. If OEM orders with drawings or samples
D. Please Inform us about above when ordering

工作压力
MpaWoring pressure
1.00.6
爆破压力
Mpa Burst Pressure
1.81.5
真空度 Kpa Vacuum86.753.3
适用温度°
Applicable Temperature
-20℃~+115℃(特殊可达-30℃~+250℃)-20℃~+115℃(-30℃~+250℃ under special conditions)
适用介质
Applicable Medium
空气、压缩空气、水、海水、热水、油、酸、碱等Air, compressed air, water, sea water, oil, acid, alkali, etc.
注:主要零件材料同KXT型 Note: the materials of main parts are the same with those of KXT type


主要数据 Main date


公称通径DN
Nominal Diameter
(mm)
长度
LengthL(mm)
轴向位移
Axial displacement (mm)
横向位移
Haorizontal isplacement(mm)
偏转角度
Angular deflection(a1+a2)°

伸长Extension

压缩Compression

40×251157121010
40×321257121010
50×401807121010
65×401807121010
65×501807121010
80×501807121010
80×651807121010
100×501807121010
100×651807121010
100×801808141210
125×652008141210
125×802008141210
125×10020010201210
150×5020010201210
150×6520010201210
150×8020010201210
150×10020010201210
150×12520012201410
200×8020012201410
200×10020012201410
200×12520012201410
200×15020012201410
250×12522012201410
250×15022012201410
250×20022012202010
300×12522014222010
300×15022014222010
300×20022014222010
300×25022014222010
350×15024014222010
350×20024014222010
350×25024014222010
350×30024014222010
400×20024014222010
400×25024014222010
400×30024014222010
400×35024014222010
450×30024014222010
450×35024014222010
450×40024014222010
500×35024014222010
500×40024014222010
500×45024014222010
Note:
1, special requirements can be produced according to the user drawings, flange standard GB/T9115.1-2000, optional (GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS, ISO, etc.) Act Blue standard production. Rubber ball can be made of natural rubber, EPDM rubber, neoprene rubber, butyl rubber, nitrile rubber, fluorine rubber and so on.
2。 When using DN200 or above for suspended water supply, the pipeline must have fixed supports or fixed brackets, otherwise the product should be installed with anti-pullout devices。
3, the user uses a rubber joint, the corresponding flange should be a valve flange or in line with GB/T9115.1 (RF) flange.


Prev:无下一篇

Next:无上一篇

安徽11选5 安徽11选5 山西11选五 安徽11选5 安徽11选5 安徽11选5 安徽11选5 安徽11选5 安徽11选5 安徽11选5